Flexible Numbering Plan - Philips Sopho 2000 IPS User Manual

FLEXIBLE NUMBERING PLAN

PROGRAMMING
START
CM29 Assign a Numbering Plan Group to each Ten-
ant.
CM20 Specify the number of digits for station num-
bers.
Example: For setting Station No. "2XXX"
NOTE:
CM10 Assign station numbers to the required LEN
according to the Numbering Plan specified by
CM20. For feature and trunk access codes, re-
fer to the programming of individual features.
CM14 Assign station numbers to the required LEN
according to the Numbering Plan specified by
CM20. For feature and trunk access codes, re-
fer to the programming of individual features.
[Series 3200 R6.2 software required]
END
DESCRIPTION
(1) 2
(2) 804
When the following features are
used with PN-AP00-B with AP00
program, do not assign 5 or more
digit station number.
• SMDR/PMS
• Front Desk Terminal (D
(1) 00-63: Tenant No.
(2) 710-713: Numbering Plan Group 0-3
• Y=0-3 Numbering Plan Group 0-3
(1) X: 1st digit of Station No.
(2) 801: 1 digit
802: 2 digits
803: 3 digits
804: 4 digits
805: 5 digits
806: 6 digits
807: 7 digits
808: 8 digits
term
)
(1) 000-763: LEN
(2) X-XXXXXXXX: Station No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX: Station No.
– 388 –
FLEXIBLE NUMBERING PLAN
DATA
NWA-008845-001 Rev.5.0
32ch1007.fm