Philips Sopho 2000 IPS User Manual page 196

A
CM05 Assign an Remote Site number that accommo-
dates CIR trunk to the AP number assigned by
CM05 Y=0.
NOTE 1: This data should be assigned only when PN-4RSTC-A card is accommodated in Remote
site.
NOTE 2: All the SENSE switch on PN-4RSTC-A card should be assigned to 15 when AP No. 64-93
is assigned for PN-4RSTC-A card accommodated in Remote site.
Assign any one number from AP numbers 64-93 with CM05 per PN-4RSTC-A card (same
even if the site that accommodates the PN-4RSTC-A cards is different).
NOTE 3: The Remote site number 01-15 can be assigned when the system is using Series 3200 R6.2
to 3300 software.
Specify the type of the mounting card for Re-
mote Site to the AP number assigned by CM05
Y=0.
NOTE:
Set the second data to 1 only when
the AP number is assigned by CM05
Y=0 which is accommodated in Re-
mote site.
CM06 Assign the MF Receiver trunk number to each
circuit of the CIR Trunk.
CM08 Assign requesting of ANI/CALLER ID Signal
from network when an incoming call
terminates.
B
DESCRIPTION
INITIAL
INITIAL
INITIAL
• Y=8
(1) 04-15, 64-93: AP No.
(2) XX 99
XX: 01-30: Remote Site No.
XX 9915
[Series 3800 software required]
XX
99
NONE : No data
• Y=6
(1) 04-15, 64-93: AP No.
(2) 1 : Remote Site
3 : AP card
• Y=04
(1) 00-15: MF Receiver Trunk No.
(2) XX Z
XX: AP No. assigned by CM05
Z : 0-3: Circuit No.
(1) 472: Request for ANI/CALLER ID
Signal
(2) 0: Available
– 178 –
CALLER ID CLASS
DATA
NOTE 2
: 01-30: Remote Site No.
: AP card No.
NWA-008845-001 Rev.5.0
NOVEMBER/15/2006
NOTE 3
32ch1003.fm