Message Registration - Philips Sopho 2000 IPS User Manual

MESSAGE REGISTRATION

PROGRAMMING
The SMDR is used to provide Message Registration information to a call accounting system.
Refer to STATION MESSAGE DETAIL RECORDING (SMDR)
To provide Message Registration on PMS:
START
CM04 Specify PN-AP00-B/PN-AP00-D with MRCA
program as the destination to send an MP call
information, if PMS with AP00 on RS-232C
(PN-AP00-B/PN-AP00-D with MRCA pro-
gram) is provided.
Specify PN-AP00-B with AP00 program as
the destination to send an MP call information,
if PMS with AP00 on RS-232C (PN-AP00-B
with AP00 program) is provided.
Specify PMS via LAN port as the destination
to send a Built-in SMDR call information, if
PMS on IP is provided.
CM08 Assign the Pseudo-Answer signal function
when the answer signal (Battery Reversal) has
not been detected within the time assigned by
CM41 Y=0>03 after making an outgoing trunk
call.
NOTE:
CM13 Provide SMDR service for outgoing calls to re-
quired stations.
A
DESCRIPTION
This data is effective when CM35
Y=04 is set to "1".
HOTEL SYSTEM PROGRAMMING
Page 615
• Y=01
(1) 03: Destination to send an MP call informa-
tion
(2) 2: PN-AP00-B/PN-AP00-D with MRCA
program
• Y=01
(1) 03: Destination to send an MP call informa-
tion
(2) 7 : PN-AP00-B with AP00 program
• Y=01
(1) 05: Destination to send a Built-in SMDR
call information
(2) 1: PMS via LAN port
(1) 123
(2) 0 : Not sent
1 : To send
• Y=06
(1) X-XXXXXX: Station No.
(2) 1 : To provide
– 815 –
MESSAGE REGISTRATION
DATA
NWA-008845-001 Rev.5.0
32ch2001.fm
JULY/01/2006