Philips Sopho 2000 IPS User Manual page 663

To provide SMDR for incoming calls, do the following programming:
I
CM13 Provide SMDR service for incoming calls to
the required stations.
CM35 Provide SMDR service for incoming calls to
the required trunk routes.
CMD000 Specify SMDR service for incoming calls with
(or regardless of) Account Code entry.
Send ANI/Caller ID to SMDR.
NOTE:
CM08 Specify whether the ANI/Caller ID is sent to
SMDR.
NOTE 1:
NOTE 2:
J
DESCRIPTION
This is required when using AP00
card for SMDR.
When providing incoming calls with
ANI, assign this data in addition to
the programming for AUTOMATIC
NUMBER IDENTIFICATION
(ANI). Page 120
When this data is assigned to 1,
SMDR service for incoming calls is
not provided even if CM13 Y=05 is
0 (To provide).
STATION MESSAGE DETAIL RECORDING (SMDR)
• Y=05
(1) X-XXXX: Station No.
(2) 0 : To provide
1 : Not provided
• Y=49
(1) 00-63: Trunk Route No.
(2) 0 : To provide
(1) 70
(2) 0 : Effective for incoming calls with Ac-
count Codes only
1 : Effective for all incoming calls
(1) 143: Sending to SMDR terminal
(2) 0 : Not sent
1 : To send
NOTE:
(1) 463: ANI/Caller ID to SMDR
(2) 0 : To send
1 : Not sent
– 645 –
PROGRAMMING
DATA
When 0 is set, the ANI is not sent
to the SMDR, but area code for
calling party, area code for
called party; authorization code
is sent to the SMDR.
NWA-008845-001 Rev.5.0
DECEMBER/02/2005
32ch1010.fm