Philips Sopho 2000 IPS User Manual page 768

B
CM77 Assign VMS display, if required.
CM51 Assign the VMS station as the destination of a
call from a station which is set Message.
CM90 Assign the MW lamp on a D
To access the VMS from DESKCON, assign
Out Pulse (DTMF signal) -short/long key.
CM41 When Out Pulse (DTMF signal)-long is desig-
nated by CM90, assign the DTMF signal
width.
NOTE:
When Out Pulse (DTMF signal)-
short is designated by CM90,
DTMF signal width is set to 128 ms.
(Fixed).
To allow Voice Mail Private Password:
CM65 Assign Password Privacy for the Tenant num-
ber of the VMS ports.
NOTE: This is effective for ports assigned
as VMS ports in CM13 Y=10.
END
DESCRIPTION
term
, if required.
• Y=0 By Character Code
(1) X-XXXXXXXX: Station No.
(2) 564D53: VMS character code
• Y=1 By Character
(1) X-XXXXXXXX: Station No.
(2) VMS (Character)
• Y=15
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: VMS Station No.
• Y=00
(1) My Line No. +
(2) F1005
• Y=00
(1) ATTCON No. (E000-E007) +
No.
(2) F6112: Out Pulse (DTMF signal)-short
F6113: Out Pulse (DTMF signal)-long
• Y=0
(1) 14: DTMF signal width
(2) 01-50: 64-3200 ms.
If no data is set, default setting is 512 ms.
• Y=30
(1) 00-63: Tenant No. of VMS ports
(2) 0 : Allow
1 : Not allowed
– 750 –
VOICE MAIL INTEGRATION
DATA
,
+ Key No.
(64 ms. increments)
NWA-008845-001 Rev.5.0
,
+ Key
32ch1011.fm