Station Message Detail Recording (Smdr); System Outline - Philips Sopho 2000 IPS User Manual

STATION MESSAGE DETAIL RECORDING (SMDR)

SYSTEM OUTLINE

STATION MESSAGE DETAIL RECORDING (SMDR)
SYSTEM OUTLINE
The Station Message Detail Recording (SMDR) feature allows the system to send a raw data of the trunk
outgoing/incoming call information. The SMDR data can be received by a personal computer (PC) which
runs an RS-232C or a LAN terminal emulation software. (referred to the rest of this manual as simply
"SMDR terminal")
The PBX provides two kinds of SMDR. One is the Main Processor (MP) built-in SMDR, and the another
is the SMDR with Application Processor (AP00).
Call information is sent out from the MP or AP00 to the SMDR terminal when each call is completed. If
the SMDR terminal is not connected to the system or if the SMDR terminal is not ready for receiving in-
formation, the call information is temporarily stored in the MP or AP00. As soon as the SMDR terminal
becomes ready to receive information, the call information temporarily stored in the MP or AP00 is sent
out to the SMDR terminal.
– 615 –
NWA-008845-001 Rev.5.0
32ch1010.fm