Pad Lock - Philips Sopho 2000 IPS User Manual

PAD LOCK

PROGRAMMING
(1) To change the Station Class with Station Authorization Code
START
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Allow Authorization Code in Service Restric-
tion Class A assigned by CM12 Y=02.
Allow Authorization Code operation after op-
erating trunk call originating in Service Re-
striction Class A assigned by CM12 Y=02.
[Series 3900 software required]
CM42 Specify the number of digits for Station Autho-
rization Code.
CM20 Assign the access code for Station Class
change with Station Authorization Code.
CM2B Assign the temporary Trunk Restriction Class
to be applied to each station after the station
class is changed.
A
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=31 Authorization Code
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=401
(1) 00-15: Service Restriction Class A as-
(2) 2 : Allow
7 : Restricted
(1) 73
(2) 01-08
NONE : 4 digits
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A230: Station Class change with Station
Authorization Code
• Y=01
(1) X-XXXXXXXX: Station No.
(2) 1-8: Trunk Restriction Class
1 : Unrestricted (RCA)
2 : Non-Restricted 1 (RCB)
3 : Non-Restricted 2 (RCC)
4 : Semi-Restricted 1 (RCD)
5 : Semi-Restricted 2 (RCE)
6 : Restricted 1 (RCF)
7 : Restricted 2 (RCG)
8 : Fully-Restricted (RCH)
– 555 –
PAD LOCK
DATA
signed by CM12 Y=02
signed by CM12 Y=02
: 1 digit-8 digits
NWA-008845-001 Rev.5.0
32ch1009.fm
JUNE/01/2007