Philips Sopho 2000 IPS User Manual page 796

F
CM08 Specify the action when the number of Wake
Up calls exceeds the maximum number as-
signed by CM42>04.
CM49 Assign the restriction announcement for Wake
Up call to the DAT card or MP built-in DAT.
CMD000 Send Wake Up message to PMS when setting
Wake Up feature, if PMS with AP00 on RS-
232C is provided.
Specify the sending of result of Wake Up mes-
sage when performing Wake Up feature.
Specify whether the printing of Wake Up set/
cancel from Front Desk Terminal is available
or not.
NOTE: This data is effective when Wake Up
is set/canceled to individual station
from Front Desk Terminal.
CMD015
Assign the Service Class number for CMD016
to required stations, if PMS with AP00 on RS-
232C is provided.
CMD016 Send Room Status Code which includes Wake
Up record, to PMS, if PMS with AP00 on RS-
232C is provided.
END
DESCRIPTION
HOTEL SYSTEM PROGRAMMING
(1) 806
(2) 0 : Restrict Wake Up call setting
1 : Set to 5 or 10 minutes prior to preset
time
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk No.
(2) 1900: Restriction Announcement for Wake
Up call
(1) 134
(2) 1: To send
(1) 135
(2) 1: To send
(1) 156
(2) 0 : Available
1 : Not available
(1) X-XXXX: Guest/Administrative station
(2) 00 -15: Service Class No.
(1) XX 05: Room Status Code sending to PMS
XX : Service Class No. assigned by
(2) 1: To send
– 778 –
AUTOMATIC WAKE UP
DATA
(EB002-EB127) assigned by
CM10/CM14
No.
CMD015
NWA-008845-001 Rev.5.0
32ch2001.fm
JUNE/01/2007