Philips Sopho 2000 IPS User Manual page 672

D
CMDD10 To change the interface condition of each port
set by CMDD01, assign the attribute data, ac-
cording to the SMDR terminal specifications.
E
DESCRIPTION
AP00 INITIAL
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) X00: Equipment Type Connected to
Port 0-3
X: 0-3: Port 0-3
(2) 1 : SMDR terminal 0
2 : SMDR terminal 1
(1) X01: Data Speed for Port 0-3
X: 0-3: Port 0-3
(2) 1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
6 : 19200 bps
(1) X02: Stop Bit Length for Port 0-3
X: 0-3: Port 0-3
(2) 0 : 1 bit
1 : 1.5 bits
2 : 2 bits
(1) X03: Data Length for Port 0-3
X: 0-3: Port 0-3
(2) 0 : 7 bits
1 : 8 bits
(1) X04: Parity for Port 0-3
X: 0-3: Port 0-3
(2) 0 : No Parity
1 : Even Parity
2 : Odd Parity
(1) X05: Station Address (SA) for Port 0-3
X: 0-3: Port 0-3
(2) 48 : 0
(1) X06: Unit Address (UA) for Port 0-3
X: 0-3: Port 0-3
(2) 32 : Space (No information)
33 : !
(1) X10: Message Format for Port 0-3
X: 0-3: Port 0-3
(2) 0 : Former NEAX 2400 IMS Format
1 : Extended NEAX 2400 IMS Format
– 654 –
PROGRAMMING
DATA
NWA-008845-001 Rev.5.0
32ch1010.fm