Philips Sopho 2000 IPS User Manual page 543

To provide External Hold Tone Source through TNT card:
START
CM10 Assign the TNT card number (External Hold
Tone Source number) to the required LEN.
NOTE 1:
NOTE 2:
CM14
Assign the TNT card number (External Hold
Tone Source number) to the required LEN.
[Series 3600 R6.1 software required]
NOTE 1:
NOTE 2:
CM48 Define the type of call to be provided with
External Hold Tone.
CM64 Specify External Hold Tone Source per each
tenant.
CM08 Specify which tenant External Hold Tone is
sent from.
END
DESCRIPTION
The TNT card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
The TNT card number must be as-
signed for each tenant. One Exter-
nal Hold Tone Source can be
provided per tenant.
The TNT card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
The TNT card number must be as-
signed for each tenant. One Exter-
nal Hold Tone Source can be
provided per tenant.
(1) 000-763: LEN
(2) DA00-DA09: TNT Card No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) DA00-DA09: TNT Card No.
• Y=0
(1) 00: C.O. Line Call
01: Tie Line Call
INITIAL
02: Station
(2) 0200: External Hold Tone Source
• Y=1
(1) 00-63: Tenant No.
(2) 00-09: External Hold Tone Source No.
(1) 388
(2) 0 : Tenant of held station/trunk
1 : Tenant of holding station
– 525 –
MUSIC ON HOLD
DATA
(TNT Card No. DA00-DA09)
NWA-008845-001 Rev.5.0
32ch1008.fm