Philips Sopho 2000 IPS User Manual page 523

To provide Mobility Access hooking, do the following programming.
[For EU]
[Series 3700 R12.2 software required]
START
CM08 Specify the output message which is sent from
PBX to ISDN network when the 2nd line is re-
leased by Mobility Access hooking.
Specify the output message which is sent from
PBX to ISDN network when the 2nd line is re-
leased by Mobility Access hooking.
NOTE:
END
DESCRIPTION
This data is effective only when the
2nd data of CM08>676 is set to 0.
(1) 676
(2) 0 : As per CM08>677
1 : CALL PROC+DISC
(1) 677
(2) 0 : CALL PROC+ALERT+DISC
1 : CALL PROC+ALERT+CONNECT+
DISC
– 505 –
MOBILITY ACCESS
DATA
NWA-008845-001 Rev.5.0
32ch1008.fm
NOVEMBER/15/2006