Philips Sopho 2000 IPS User Manual page 205

A
CM74 Assign the calling party number, which is used
for Calling Name search, to the 1000-Slot
Memory Block No. 3.
NOTE 1:
When this feature is provided, the
1000-Slot Memory Block No. 3
cannot be used for Station Speed
Dialing.
NOTE 2:
The calling party number must be
the number received from network,
including the area code.
Assign the calling party name to be displayed
for the calling party number assigned by CM74
Y=0, to each Memory Slot number, by charac-
ter codes or characters.
CM90 Provide the D
Number Display or Calling Name Display.
Provide the DESKCON with a select key of
Calling Number Display or Calling Name Dis-
play.
END
DESCRIPTION
term
with a select key of Calling
• Y=0
(1) 3 YY Z
3 : 1000-Slot Memory Block No. 3
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
(2) Stored No.:
Access Code (Maximum 4 digits) +
Calling Party No. (Maximum 16 digits)
NONE : No data
• Y=1
(1) 3 YY Z
3 : 1000-Slot Memory Block No. 3
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
(2) XX...XX: Calling Party Name Character
NONE : No data
See APPENDIX B:
Page B2
• Y=2
(1) 3 YY Z
3 : 1000-Slot Memory Block No. 3
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
(2) XX...XX: Calling Party Name Character
NONE : No data
• Y=00
(1) My Line No. +
(2) F1099: Select Key of Calling Number
• Y=00
(1) ATTCON No. (E000-E077) +
No.
(2) F6122: Select Key of Calling Number
– 187 –
CALLER ID DISPLAY
DATA
Code (Maximum 32 digits, 16
characters)
Character Code
(Maximum 16 characters)
,
+ Key No.
Display or Calling Name Display
,
Display or Calling Name Display
NWA-008845-001 Rev.5.0
JANUARY/20/2006
NOTE 1
,
+
NOTE 2
Table.
+ Key
32ch1003.fm