Philips Sopho 2000 IPS User Manual page 111

When the 1st and/or the 2nd answering message is required: CM30 Y=30, 31>2nd data 08, CM64
Y=0>2nd data 02, or Night Message is required: CM64 Y=2>2nd data 02, do the following programming.
START
CM10 Assign the Digital Announcement Trunk card
number to the required LEN.
NOTE 1:
CM14 Assign the Digital Announcement Trunk card
number to the required LEN.
[Series 3200 R6.2 software required]
NOTE 1:
CM49
Assign the function of the Digital Announce-
ment Trunk.
Assign the Message number to the required
tenants.
A
DESCRIPTION
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1
For PIM2/3
For PIM4/5
For PIM6/7
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127: Digital Announcement
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 01XX: 1st Answering Message
02XX: 2nd Answering Message/Night
Message
XX : 00-63 (Message No.)
• Y=01 For 1st Answering Message
• Y=02 For 2nd Answering Message/Night
Message
(1) 00-63: Tenant No.
(2) 00-63: Message No. assigned by CM49
Y=00
– 93 –
AUTOMATED ATTENDANT
DATA
Trunk Card No.
: EB002-EB031
: EB032-EB063
: EB064-EB095
: EB096-EB127
Trunk Card No.
Card No. assigned by CM10/
CM14
NWA-008845-001 Rev.5.0
32ch1002.fm