Philips Sopho 2000 IPS User Manual page 162

B
CM08 Select the trunk route seized for Call Forward-
ing-No Answer-Outside.
CM90 Assign Call Forwarding-No Answer keys to
term
the D s, as required.
CM65 Provide Call Forwarding feature with each ten-
ant as per incoming call type.
CM08 Specify the timing of Call Forwarding-No An-
swer for a tie line incoming call.
[Series 3200 R6.2 software required]
NOTE:
The timing for a tie line incoming call is set as following data.
When CM08>126:0 is set:
2ND DATA OF CM13 Y=46
When CM08>126:1
2ND DATA OF CM13 Y=46
END
DESCRIPTION
0
1
is set:
0
1
(1) 600
(2) 0 : By calling party's tenant/terminating
trunk's tenant
1 : By Call Forwarding setting station's
tenant
• Y=00
(1) My Line No. +
(2) F0016: Call Forwarding-No Answer Set/
For setting the same key as Call Forwarding-
Busy Line
(1) My Line No. +
(2) F0012: Call Forwarding-No Answer/Busy
• Y=23 Internal Call or ATT assisted Call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding
(1) 126
(2) 0 : As per timing for internal call or an as-
sisted call
1 : As per timing for trunk incoming call
TIMING FOR TIE LINE INCOMING CALL
As per CM41 Y=0>101
As per CM41 Y=0>15
TIMING FOR TIE LINE INCOMING CALL
As per CM41 Y=0>100
As per CM41 Y=0>01
– 144 –
CALL FORWARDING
CALL FORWARDING-NO ANSWER
DATA
,
+ Key No.
Cancel
,
+ Key No.
Line Set/Cancel
NWA-008845-001 Rev.5.0
32ch1003.fm