Philips Sopho 2000 IPS User Manual page 326

< Data Programming >
COMMAND 1st DATA
CM35 Y=18
CM35 Y=18
CM35 Y=170
CM35 Y=170
CM35 Y=172
CM35 Y=172
CM35 Y=171
CM35 Y=171
CM76 Y=90
CM76 Y=90
CM76 Y=01
CM76 Y=01
2nd DATA
00 0
01 0
00 0
01 0
00 07
01 07
00 05
01 05
41234 000
51234 001
000 2000
001 3000
DIRECT INWARD DIALING (DID)
Provide DID Digit Conversion to the trunk route
number 00.
Provide DID Digit Conversion to the trunk route
number 01.
Specify the Development Table 1 for DID digit con-
version to the trunk route number 00.
Specify the Development Table 1 for DID digit con-
version to the trunk route number 01.
Specify the number of digits to be received on DID
for Development Table1 as 7 digits to trunk route
number 00.
Specify the number of digits to be received on DID
for Development Table1 as 7 digits to trunk route
number 01.
Specify the number of digits to be converted on DID
for Development Table1 as 5 digits to trunk route
number 00.
Specify the number of digits to be converted on DID
for Development Table1 as 5 digits to trunk route
number 01.
Assign the Number Conversion Block number 000
to the DID number 41234.
Assign the Number Conversion Block number 001
to the DID number 51234.
Assign the station number 2000 to the Number Con-
version Block number 000.
Assign the station number 3000 to the Number Con-
version Block number 001.
– 308 –
DID DIGIT CONVERSION
REMARKS
NWA-008845-001 Rev.5.0
32ch1006.fm