Philips Sopho 2000 IPS User Manual page 210

By the following programming, the Calling Party Number and the Calling Party Name sent from the net-
work over CCIS can be displayed on the LCD of the analog telephone for Caller ID-Station.
START
Specify the calling party information which is
CM12
sent to the analog telephone for Caller ID-Sta-
tion.
CM08 Specify whether the calling station number is
sent to the analog telephone for Caller ID-Sta-
tion when an internal call is terminated.
Specify whether the calling party name is sent
to the analog telephone for Caller ID-Station
when an internal call is terminated.
[Series 3200 R6.1 software required]
NOTE 1:
NOTE 2:
END
HARDWARE REQUIRED
Analog telephone with LCD which supports Caller ID
SDT card (PN-4RSTF/PN-4RSTF-A)
LLC card (PN-4LLCB)
-48 V Power Supply (PZ-PW122)
DESCRIPTION
This data is effective only when the
2nd data of CM12 Y=20 is set to 1.
For the programming for Calling
Number Display-CCIS and Calling
Name Display-CCIS, refer to the
NEAX 2000 IPS CCIS System Man-
ual.
• Y=20
(1) X-XXXXXXXX: Station No.
(2) 0: Calling Party Number
1: Calling Party Number and Calling Party
Name
(1) 507
(2) 0 : Not sent
1 : To send
(1) 524
(2) 0 : To send
(Calling Party Name is sent)
1 : Not sent
(Calling Party Number is sent)
– 192 –
CALLER ID-STATION
DATA
NWA-008845-001 Rev.5.0
32ch1003.fm
JULY/01/2006