Station Speed Dialing - Philips Sopho 2000 IPS User Manual

STATION SPEED DIALING

(1) To provide Single Line Telephone or D
START
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Allow Station Speed Dialing in the Service Re-
striction Class A assigned by CM12 Y=02.
CM20 Assign access codes for Station Speed Dialing,
Origination, Entry and Cancel, respectively.
CM08 Specify whether to provide Toll Restriction for
an outgoing call by Station Speed Dialing.
Specify whether to set "#" dialing as paused
data (1.5 seconds) or called number to C.O.
line when DTMF station or D
the setting of Station Speed Dialing feature.
Specify "*" dialing is set as programmable
pause by CM41 Y=0>38 or dialed digit when
the DTMF station or D
ting of the Station Speed Dialing feature.
CM41 Assign the Programmable pause of Station
Speed Dialing.
A
term
:
DESCRIPTION
term
dials "#" in
term
dials "*" in the set-
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=07
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code (#*, 7*, 7#)
(2) A064: Origination
A065: Entry
A066: Cancel
(1) 035
(2) 0 : Not provided
1 : To provide
(1) 168
(2) 0 : Paused data (1.5 seconds)
1 : Dialed digit
(1) 171
(2) 0 : Programmable pause by CM41
Y=0>38
1 : Dialed digit
• Y=0
(1) 38
(2) 00-07: 1.5-12 seconds
If no data is set, the default setting is 1.5
seconds.
– 665 –
STATION SPEED DIALING
DATA
(1.5 second increments)
NWA-008845-001 Rev.5.0
32ch1010.fm