Trunk-To-Trunk Connection - Philips Sopho 2000 IPS User Manual

TRUNK-TO-TRUNK CONNECTION

PROGRAMMING
START
CM12 Assign Service Restriction Class C to each sta-
tion.
CM15 Provide the switch hook flash capability dur-
ing C.O. line connection, to the required sta-
tions.
CM36 Specify the combination of trunk routes allow-
ing the Trunk-to-Trunk Connection.
CM08 Provide the system with Ring Transfer for Call
Transfer-All Calls to a trunk when a station
holds another station or trunk.
Provide the system with forced release when a
tandem call duration passes a predetermined
time.
CM35 Allow or restrict forced release of tandem con-
nection for the incoming trunk route.
This data is available when CM08>029 is set
to 0.
CM41 Specify the forced release timing for tandem
call.
A
DESCRIPTION
TRUNK-TO-TRUNK CONNECTION
• Y=07
(1) X-XXXXXXXX: My Line No.
(2) 00-15 : Service Restriction Class C
• Y=90, 91
(1) 00-15: Service Restriction Class C as-
(2) 1 : Allow
• Y=0
(1) XX ZZ
XX: 00-63: Incoming trunk route
ZZ : 00-63: Outgoing trunk route
(2) 0 : Allow
1 : Restricted
(1) 253
(2) 0: Available
(1) 029
(2) 0 : To disconnect
1 : To continue
• Y=119
(1) 00-63: Trunk Route No.
(2) 0 : Allow
1 : Restricted
• Y=0
(1) 54
(2) 01-06: 64-224 minutes
If no data is set, the default setting is 96-128
minutes
– 716 –
DATA
signed by CM12 Y=07
(32 minute increments)
NWA-008845-001 Rev.5.0
32ch1011.fm