External Paging With Meet-Me - Philips Sopho 2000 IPS User Manual

EXTERNAL PAGING WITH MEET-ME

PROGRAMMING
(1) To provide External Paging from stations
When one Paging trunk is connected with one AMP relay circuit.
START
CM10 Assign the Paging Trunk (COT card and DK
card) to the required LEN.
NOTE 1:
CM14
Assign the Paging Trunk (COT card and DK
card) to the required LEN.
[Series 3200 R6.2 software required]
NOTE 1:
CM08 Specify ON/OFF condition for external relay/
external key on MP built-in DK00 card.
A
DESCRIPTION
The DK card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
The DK card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
EXTERNAL PAGING WITH MEET-ME
(1) 000-763: LEN
(2) D000-D255: COT card
E800-E831 : DK card
For PIM0/1 : E800-E807
For PIM2/3 : E808-E815
For PIM4/5 : E816-E823
For PIM6/7 : E824-E831
NOTE 2:
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) D000-D255 : COT card
E800-E831
For FP No. 00: E800-E807
For FP No. 01: E808-E815
For FP No. 02: E816-E823
For FP No. 03: E824-E831
NOTE 2:
(1) 700
(2) 0 : ON (Ground Start)
OFF (Ground Off [Open])
1 : ON (Ground Off [Open])
OFF (Ground Start)
– 362 –
DATA
Circuit No. 3 of E831 is used for
built-in External Equipment In-
terface of MP card by setting
CM44.
: DK card
Circuit No. 3 of E831 is used for
built-in External Equipment In-
terface of MP card by setting
CM44.
NWA-008845-001 Rev.5.0
JUNE/01/2007
32ch1006.fm