Tenant Service - Philips Sopho 2000 IPS User Manual

TENANT SERVICE

PROGRAMMING
START
CM12 Assign a Tenant number to each station.
CM30 Assign a Tenant number to each trunk.
CM29 Assign a Numbering Plan Group number to
each Tenant.
CM20 Assign required access codes for each Num-
bering Plan Group.
To provide a trunk route for each Tenant, as-
sign Tenant Block 00-23 to desired Trunk
Route access code.
CM23 When Tenant Block 00-23 is assigned by
CM20, assign a trunk route and Tenant number
to the Tenant Block.
CM10 When an External Key for Day/Night Mode
change or Class of Service change is required,
assign the DK card to required LEN.
NOTE 1:
A
DESCRIPTION
The DK card number must be as-
signed to the first LEN (level 0) and
the third LEN (Level 2).
• Y=04
(1) X-XXXXXXXX: Station No.
(2) 00
01 -63: Tenant No. 01-63
• Y=01
(1) 000-255: Trunk No.
(2) 00
01 -63: Tenant No. 01-63
(1) 00-63: Tenant No.
(2) 710-713: Numbering Plan Group 0-3
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A000-A097
801-818
A100-A152
100-163
300-323: Tenant Block 00-23
• Y=00-23 Tenant Block 00-23
(1) 00-63: Tenant No.
(2) 100-163: Trunk Route 00-63
(1) 000-763: LEN
(2) E900-E963 : DK Card No.
For PIM0/1: E900-E915
For PIM2/3: E916-E931
For PIM4/5: E932-E947
For PIM6/7: E948-E963
NOTE 2:
– 685 –
TENANT SERVICE
DATA
: Tenant No. 00
: Tenant No. 00
Circuit No. 3 of E963 is used for
built-in External Key Interface of
MP card by setting CM61.
NWA-008845-001 Rev.5.0
32ch1011.fm