Philips Sopho 2000 IPS User Manual page 570

A
CM51 Assign the destination of call forwarding when
the calling number is not informed from net-
work.
NOTE 1:
NOTE 2:
CM49 Specify the function of Digital Announcement
Trunk.
NOTE:
CM41 Specify the duration of an Announcement for
no Caller-ID.
NOTE:
CM35 Specify a distinctive LED indication on D
for incoming call with no CLI.
NOTE:
END
HARDWARE REQUIRED
term
D with LCD and DLC card
DESCRIPTION
This command needs to be set when
CM35 Y=255/257 is set to 0.
Assign the function of Digital An-
nouncement Trunk by CM49 Y=00
when this command is set to Digital
Announcement Trunk No.
This command is effective only when
CM51 Y=33 is set to Digital An-
nouncement Trunk No.
If the destination of call forwarding
is assigned for Digital Announce-
ment Trunk by CM51 Y=33, when
time out occurs the trunk is released.
This command is effective on the following conditions.
• CM35 Y=32 is set to 1.
• CM35 Y=255, 257 are set to 0 or 2, and D
• Y=33
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: Station No.
E000: Attendant
EB000-EB127: Digital Announcement
NONE : No data
• Y=00
(1) 000-127: Digital Announcement Trunk No.
(2) 2200
NONE : No data
• Y=0
(1) 45: Announcement Service Timer
(2) 01-99
NONE : 16: 60-64 seconds
term
• Y=258
(1) 0 : Green (120 IPM)
(2) 1 : Red (120 IPM)
term
receives the incoming call.
– 552 –
NO CID CALL ROUTING
DATA
Trunk No. assigned by
CM10/CM14
assigned by CM51 Y=33
: Announcement Service for no
Caller-ID
: [0-4 seconds]-[392-396
seconds] (4 seconds increments)
NWA-008845-001 Rev.5.0
DECEMBER/02/2005
32ch1009.fm