Priority Call - Philips Sopho 2000 IPS User Manual

PRIORITY CALL

PROGRAMMING
START
CM12 Assign Service Restriction Class A for Priority
Call to the required stations.
CM15 Allow Priority Call in Service Restriction
Class A assigned by CM12 Y=02.
CM20 Assign the access code for Priority Calls 0 and
1 respectively.
CM08 Specify the destination for Priority Calls 0 and
1.
CM90 If CM08>250/251 is set to "1", assign the Pri-
ority Calls 0 and 1 to any Priority Call Keys on
DESKCON.
CM51 If CM08>250/251 is set to "0", assign the des-
tination of Priority Calls 0 and 1 to the desired
station.
END
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=17 Priority Call 0
• Y=18 Priority Call 1
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A088: Priority Call 0
A089: Priority Call 1
(1) 250: For Priority Call 0
(2) 0 : Same Station as Off-Hook Alarm
1 : Attendant Console
(1) 251: For Priority Call 1
(2) 0 : Same station as Off-Hook Alarm
1 : Attendant Console
• Y=00
(1) ATTCON No. (E000-E007) +
No.
(2) F6054: Priority Call 0
F6055: Priority Call 1
• Y=12
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: Station No.
– 562 –
PRIORITY CALL
DATA
signed by CM12 Y=02
NWA-008845-001 Rev.5.0
,
+ Key
32ch1009.fm