Hotline-Inside/Outside - Philips Sopho 2000 IPS User Manual

HOTLINE-INSIDE/OUTSIDE

PROGRAMMING
For internal Hotline:
START
CM12 Assign the Hotline station to the required sta-
tions.
CM52 Set up the Hotline pair. Bidirectional Hotlines
should be assigned as follows:
Hotline Pair No. Calling Side
00
01
NOTE 1:
CM08 Specify the result of a Switch Hook Flash on
each Hotline station.
To allow Hotline stations to transfer a call or
access a feature, set the data to "0".
END
DESCRIPTION
Called Side
Station A
Station B
There is a maximum of 100 assign-
ments for Hotline destination. If in-
ternal bidirectional Hotline calling
is required, two assignments (one
for each direction) must be made. A
maximum of 50 bidirectional Hot-
lines can be assigned.
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 04: Hotline Station
• Y=00-99 Hotline Pair No.
(1) 0: Calling Side
(2) X-XXXXXXXX: Station No. /Data Sta-
Station B
Station A
(1) 1: Called Side
(2) X-XXXXXXXX: Station No. /Data Sta-
E000-E007
NOTE 2:
(1) 057
(2) 0 : Special Dial Tone
1 : Attendant Recall
– 407 –
HOTLINE-INSIDE/OUTSIDE
DATA
tion No. assigned by
CM12 Y=03
tion No.
: Attendant Console No.
Do not assign station number
with first digit "0".
NWA-008845-001 Rev.5.0
32ch1007.fm