Internal Tone/Voice Signaling - Philips Sopho 2000 IPS User Manual

INTERNAL TONE/VOICE SIGNALING

PROGRAMMING
START
CM08 To activate the Single-Digit Feature Access
Code feature, set the data for 050, 051, 069,
148 and 543 to "1".
Provide the system with the Single-Digit Fea-
ture Access Code on RBT or Voice Call con-
nection.
Specify if Voice Call is provided when calling
term
a D is set to Voice First from a Single-Line
Telephone or a D
Provide the system with the Single-Digit Fea-
ture Access Code on BT connection.
Specify whether the access codes of Single-
Digit Feature Access Code feature are fixed or
not.
[Series 3600 software required]
CM20 When using programmable access code
(CM08>570 is set to 0), assign the Single-
Digit Feature Access Code for the RBT con-
nection.
[Series 3600 software required]
A
DESCRIPTION
term
without an LCD.
INTERNAL TONE/VOICE SIGNALING
(1) 050: * Button as Switch Hook Flash.
(2) 1 : Ineffective
(1) 051: # Button as Switch Hook Flash.
(2) 1 : Ineffective
(1) 069: Single Digit Dialing on BT Connec-
tion
(2) 1 : Step Call
(1) 148: Same Last Digit Redialing on BT
Connection
(2) 1 : Ineffective
(1) 543: Step Call
(2) 1 : Allow
(1) 156
(2) 0: Available
(1) 270
(2) 0 : Not provided (Busy Tone)
1 : To provide
(1) 208
(2) 0: Available
(1) 570
(2) 0 : Programmable Access Code
1 : Fixed Access Code
• Y=5
(1) X: Access code (0-9, A (*), B (#))
(2) 1
NONE : Single-Digit Feature Access
– 420 –
DATA
: Internal Tone/Voice Signaling
Code is not available
NWA-008845-001 Rev.5.0
32ch1007.fm
JULY/01/2006