Philips Sopho 2000 IPS User Manual page 586

B
CM30 Provide Trunk-Direct Appearances to the
trunk number.
END
To provide the Digital Single Line on D
START
CM12 Assign Service Restriction Class C to each sta-
tion.
CM15 Disable Dial Tone Activation when pressing
one-touch speed key while terminal is idle.
CM90 Assign and delete feature keys.
NOTE:
Prime line should be assigned to Key 9.
Digital Single Line is a D
key assigned in CM90. However, the Digital
Single Line Terminal has no LEDs, speaker, or
microphone. Assign any features that can be
used without these devices.
CM93 Assign prime line to My Line.
END
DESCRIPTION
term
, do the following programming.
DESCRIPTION
Use Key number 93 for Redial key.
Use Key number 96 for Flash key.
term
and can use any
PROPRIETARY MULTILINE TERMINAL
• Y=18
(1) 000-255: Trunk No.
(2) 0: To provide
• Y=07
(1) X-XXXXXXXX: Station No.
(2) 00-15 : Service Restriction Class C
• Y=87 One-Touch activates DT when Ter-
minal Idle
(1) 00-15: Service Restriction Class C
(2) 0 : Remain Idle
1 : Off Hook and Dial Tone
• Y=00 Key Data
(1) X-XXXXXXXX: My Line No. +
(2) F1100-F1199: Station Speed Dialing 00-99
F1012
F0069
F1004
(1) X-XXXXXXXX: My Line No.
(2) X-XXXXXXXX: Prime Line
– 568 –
DATA
DATA
assigned by CM12 Y=07
Key No.
: Conference key
CNF
This key is required to pro-
gram speed dial keys.
: Last number redial (Key No.
93)
: Transfer key (Key
TRF
No. 96)
NWA-008845-001 Rev.5.0
,
+
32ch1009.fm
JUNE/01/2007