Philips Sopho 2000 IPS User Manual page 370

To set the Do Not Disturb feature to the stations of SLT/sub line of D
term
commodated to the D
the stations on the lamp of D
[Series 3500 software required]
NOTE: To make available this feature, do the programming both of the setting side (D
side (stations of SLT, sub line of D
• For Setting Side (D
START
CM12 Assign Service Restriction Class C to the re-
quired stations.
CM15 Allow Do Not Disturb Setting in Service Re-
striction Class C assigned by CM12 Y=07.
CM12
Assign the Do Not Disturb Lamp Indication on
Line/Trunk/Feature keys of D
END
multiline as the sub line, and to display the Do Not Disturb Set/Reset status of
term
:
term
term
)
DESCRIPTION
term
.
term
or virtual line stations).
• Y=07
(1) X-XXXXXXXX: Station No.
(2) 00-15 : Service Restriction Class C
• Y=188
(1) 00-15: Service Restriction Class C assigned
by CM12 YY=07
(2) 0 : Allow
1 : Restricted
• Y=62
(1) X-XXXXXXXX: Station No.
(2) 0 : Not indicated
1 : Not used
2 : Do Not Disturb Lamp Indication
3 : Message Waiting Lamp Indication
– 352 –
DO NOT DISTURB
/Virtual line stations that are ac-
term
) and the set
DATA
NWA-008845-001 Rev.5.0
NOVEMBER/15/2006
32ch1006.fm