Philips Sopho 2000 IPS User Manual page 450

To provide C.O. operator call with LCR, assign the following system data.
START
CM20 Assign the access code for LCR Group 0.
CM81 Assign the Toll Restriction Patterns with eight
kinds of Trunk Restriction Classes assigned by
CM12 Y=01. Toll Restriction Pattern 00-15 is
already programmed as shown below. If a new
Restriction Pattern is required, change the data
of the Restriction Pattern 01-13 (00, 14 and 15
are fixed).
TRUNK
RESTRICTION
CLASS
1 RCA
2 RCB
3 RCC
4 RCD
5 RCE
6 RCF
7 RCG
8 RCH
0: Restricted
3: Allowed
CM8A Assign the Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
A
DESCRIPTION
01 02 03 04 05
TOLL RESTRICTION PATTERN NUMBER ON EACH TRUNK RESTRICTION CLASS
01 02 03 04 05
3 0 3 3
3 0 3 3
3 0 3 0
3 0 0 0
3 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
LEAST COST ROUTING-3/6 DIGIT
• Y=0-3 Number Plan Group 0-3
(1) X-XXXX: Access Code
(2) A126: LCR Group
• Y=01-13 Toll Restriction Pattern No. 01-13
(1) 1-8: Trunk Restriction Class
(2) 0: Restricted
3: Allowed
Y
06 07 08 09
06 07 08 09
3 0 0 0 3
0 0 0 0 3
0 0 0 0 3
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
• Y=4010 Area Code for C.O. Operator
(1) X-XXX: Area Code for C.O. Operator
This data is only effective for an access
code assigned to CM20>A126.
(2) 000-063: Route Pattern No. 00-63
– 432 –
DATA
10 11 12 13 14
10 11 12 13 14
3 3 3 3 0
3 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
NWA-008845-001 Rev.5.0
15 00
15 00
3 0
3 0
3 0
3 0
3 0
3 0
3 0
3 0
32ch1007.fm