Philips Sopho 2000 IPS User Manual page 837

A
CM20 Assign access code for Message Waiting Set/
Reset/Retrieve from administrative station, if
required.
NOTE 2: This data assignment is not required
when Message Waiting is set by
PMS.
CM51 Assign the Message Front destination to be
routed by dialing MW Retrieve code or press-
ing MW key on D
ing is set.
CM08 If an Attendant Console is assigned to as the
Message Front destination by CM51 Y=15, set
the data for 233 to 0 and set the data for 234 to
1. With this setting, Message Waiting is auto-
matically reset when the Attendant answers.
To reset Message Waiting while the Message
Front station or attendant rings, set the data for
234 to 0.
To reset Message Waiting when the desired
station answers a second call from the Message
Front station or attendant, set the data for 235
to 0 and set the data for 234 to 1.
Specify whether Message Waiting record is
printed out on Hotel Printer, and the report is
sent to PMS when setting or resetting Message
Waiting.
B
DESCRIPTION
term
to which Message Wait-
HOTEL SYSTEM PROGRAMMING
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A040: MW Lamp Control-Set
A041: MW Lamp Control-Reset
A147: MW Retrieve
• Y=15
(1) 00-63: Tenant No. to which MW set D
(2) X-XXXXXX: Station No./My Line No.
or
E000: Attendant Console
(1) 233
(2) 0: Available
(1) 234
(2) 1 : Not available
(1) 234
(2) 0: Available
(1) 235
(2) 0: Available
(1) 234
(2) 1 : Not available
(1) 267
(2) 0 : Available
1 : Not available
– 819 –
MESSAGE WAITING
DATA
belongs
NWA-008845-001 Rev.5.0
term
32ch2001.fm
JUNE/01/2007