Philips Sopho 2000 IPS User Manual page 528

To use a DSS Console with the D
START
CM10 Assign the DSS Console number to the re-
quired LEN.
CM14 Assign the DSS Console number to the re-
quired LEN.
[Series 3200 R6.2 software required]
NOTE:
CM96 Assign the My Line number of the Attendant
Position associated with each DSS Console.
CM97 Assign station numbers to the DSS keys.
Assign the MW, DND, NT keys as function
keys.
END
term
Attendant Position, add the following programming.
DESCRIPTION
When using Series 3500 software or
later, for the FP No. 00-03 of MP
built-in FP/FP card of Main Site
and MP built-in FP of Remote Site,
the DSS console number (E100-
E131) can be assigned without limit
as shown right.
MULTILINE TERMINAL ATTENDANT POSITION
(1) 000-763: LEN
(2) E100-E131 : DSS Console No.
For PIM0/1: E100-E107
For PIM2/3: E108-E115
For PIM4/5: E116-E123
For PIM6/7: E124-E131
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) E100-E131 : DSS Console No.
For FP No. 00: E100-E107
For FP No. 01: E108-E115
For FP No. 02: E116-E123
For FP No. 03: E124-E131
(1) 00-31: DSS Console No. assigned by
(2) X-XXXXXXXX: My Line No. of Atten-
(1) For DSS key:
DSS Console No. (00-31) +
No. (00-59)
(2) X-XXXXXXXX: Station No.
(1) For Function key:
DSS Console No. (00-31) +
No. (57-59)
(2) F1049: Message Waiting
F1053: Do Not Disturb
F0043: Night Key
– 510 –
DATA
CM10/CM14 (E100-E131)
dant Position
,
,
NWA-008845-001 Rev.5.0
JANUARY/20/2006
+ DSS key
+ DSS key
32ch1008.fm