Philips Sopho 2000 IPS User Manual page 635

(2) MP Built-in SMDR on IP
The system outline of the Built-in SMDR is shown below. The Built-in SMDR on IP consists of the
MP and the external SMDR terminal.
• MP card:
The MP stores various kinds of information on an event basis. When a call is completed, the MP
sends out the call information pertaining to that specific call to the SMDR terminal.
One LAN port can be used for the SMDR terminal interface.
The MP keeps supervising the status of the SMDR terminal. If the SMDR terminal is not ready to
receive information (Busy Status), the MP temporarily stores the call information into its internal
memory.
When the number of the call records stored in the MP reaches the maximum, new call records will
be lost.
The call record memory will be cleared by MP reset.
• SMDR Terminal:
A Personal Computer with LAN port is used as the SMDR terminal for receiving and processing
the call information via LAN.
Only one SMDR terminal is available.
STATION MESSAGE DETAIL RECORDING (SMDR)
– 617 –
SYSTEM OUTLINE
NWA-008845-001 Rev.5.0
32ch1010.fm
JULY/01/2006