Philips Sopho 2000 IPS User Manual page 529

To restrict the call termination to D
[Series 3700 R12.1 software required]
START
CM13 Restrict the call termination to D
Position to which Night Mode is set.
CM08 Provide the Attendant Night Transfer when a
station/trunk call is terminated to D
dant Position to which Night Mode is set.
CM51 Not assign transfer destination of station/trunk
term
call to D
Mode is set.
END
To provide the Attendant Night Transfer when a station/trunk call is terminated to D
to which Night Mode is set:
[Series 3700 R12.1 software required]
START
CM13 Allow the call termination to D
Position to which Night Mode is set.
CM08 Provide the Attendant Night Transfer when a
station/trunk call is terminated to D
dant Position to which Night Mode is set.
CM51 Assign the transfer destination of station/
Priority Call to D
which Night Mode is set.
Assign the transfer destination of DID/Tie
Line/station call when the called station is set
to Call Forwarding-Busy Line/-No Answer
and the destination of forwarded call is set to
term
the D Attendant Position to which Night
Mode is set.
END
term
Attendant Position to which Night Mode is set:
DESCRIPTION
term
Attendant
term
Attendant Position to which Night
DESCRIPTION
term
Attendant
term
term
Attendant Position to
or
MULTILINE TERMINAL ATTENDANT POSITION
• Y=56
(1) X-XXXXXXXX: Station No.
(2) 0: Restricted
(1) 576
Atten- (2) 0: To provide
• Y=09
(1) 00-63: Tenant No.
(2) NONE : No data
• Y=56
(1) X-XXXXXXXX: Station No.
(2) 1 : Allowed
(1) 576
Atten- (2) 0: To provide
• Y=09
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: Station No.
– 511 –
DATA
term
Attendant Position
DATA
NWA-008845-001 Rev.5.0
32ch1008.fm
JULY/01/2006