Dial By Name - Philips Sopho 2000 IPS User Manual

DIAL BY NAME

PROGRAMMING
(1) Assignment for Soft Key
START
CM12 Specify that the Soft Key feature is available to
term
each D
Assign Soft Key Pattern number to each D
CM9A
Assign the Dial By Name function to each Soft
Key on idle status of the D
The LCD shows a maximum of 4 Soft Keys at
once. If assigning more than 4 Soft Keys on
one status, it is necessary to assign Scroll key
at every 4 keys (on 1st through 4th display).
NOTE 1:
NOTE 2:
NOTE 3:
NOTE 4:
NOTE 5:
A
DESCRIPTION
.
term
.
Scroll key must be assigned as a key
for each active display.
Help key is only available in Pattern
No. 3.
For the Pattern No. 3, the initial Soft
Key data for Dial By Name are
assigned as follows:
CM9A Y=03
1st Data 2nd Data
0001 F5014
0002 F5015
Pattern No. 3 is fixed.
Dial By Name is available only
term
when the D is in idle state.
• Y=22
(1) X-XXXXXXXX: My Line No.
(2) 0 : Available
term
. • Y=23
(1) X-XXXXXXXX: My Line No.
(2) 0 : Pattern No. 0
1 : Pattern No. 1
2 : Pattern No. 2
3 : Pattern No. 3
• Y=00-03 Soft Key Pattern No. 0-3 assigned
(1) 00 bb
00: Status No. (Idle state)
bb: 00-15: Soft Key No.
00-03: Indicated on 1st display
04-07: Indicated on 2nd display
08-11: Indicated on 3rd display
12-15: Indicated on 4th display
(2) F5002
F5014
F5015
F5016
F5017
F5018
F5019
NONE : No data
– 259 –
DIAL BY NAME
DATA
by CM12 Y=23
NOTE 5
: Scroll key to change Soft Key
Indication
: Dial By Name for System Speed
Dialing (300-Slot Memory)
: Dial By Name for Station Speed
Dialing
: Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 0)
: Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 1)
: Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 2)
: Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 3)
NWA-008845-001 Rev.5.0
32ch1005.fm
JULY/01/2006