Axis %1 Machine Data %2 Invalid Value; Axis %1 Machine Data %2[%3] Invalid Value - Siemens Sinamics S120 Diagnostic Manual

26014

Axis %1 machine data %2 invalid value

Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
Definitions: Machine data includes a value that is not valid.
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Power On.
Program Switch control OFF - ON.
Continuation:
26015

Axis %1 machine data %2[%3] invalid value

Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
%3 = Index: MD array index
Definitions: Machine data includes a value that is not valid.
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Power On.
Program Switch control OFF - ON.
Continuation:
26016 Axis %1 machine data %2 invalid value
Parameters: %1 = Axis name, spindle number
%2 = String: MD identifier
Definitions: Machine data includes a value that is not valid.
Reaction: NC not ready.
The NC switches to follow-up mode.
Mode group not ready, also effective for single axes.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Repeat entry with correct value and then Reset.
Program Teileprogramm neu starten.Clear alarm with the RESET key in all channels of this mode group. Restart part program.
Continuation:
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
NCK alarms
359