Nc User Memory Full; Nc Machine Oem Memory Full; Nc System Memory Full; Nc Memory Limit Tmp Reached/Nc External Memory Limit Reached - Siemens Sinamics S120 Diagnostic Manual

6581

NC user memory full

Definitions: The DRAM file system of the user area is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6582

NC machine OEM memory full

Definitions: The DRAM file system of the machine OEM area is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6583

NC system memory full

Definitions: The DRAM file system of the system area (Siemens) is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6584 NC memory limit TMP reached
Definitions: The DRAM file system of the TMP (temporary) area is full. The job cannot be executed.
Reaction: Alarm display.
Remedy: Increase MD18351 $MN_MM_DRAM_FILE_MEM_SIZE bzw. MD18355 $MN_MM_T_FILE_MEM_SIZE or switch off
the precompilation of individual or all cycles
Program Clear alarm with the Delete key or NC START.
Continuation:
6585 NC external memory limit reached
Definitions: The DRAM file system of the external area (execution of the external drive) is full.
The job cannot be executed.
Reaction: Alarm display.
Remedy: Load the files to be executed explicitly into the NCK.
Program Clear alarm with the Delete key or NC START.
Continuation:
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
NCK alarms
65