Clock Setting With A Programming Tool - Mitsubishi Electric MELSEC Q Series Reference Manual

4.2.4

Clock setting with a programming tool

With a programming tool, the clock of the CPU module that is connected to the network can be set up.
Setting the clock time for multiple stations is also available.
1.
Open the "Set Clock" window in the programming tool.
[Online]
2.
Enter the date, time, and day. Then refer to the following to configure the setting.
3.
Click the
Item
Connection Channel List
Get Time from PC
Specify Execution Target
● The clock time is set up regardless of the ON/OFF status of SM210 (Clock data set request) of the CPU module. (The
ON/OFF status of SM210 does not change after execution of the time setup.)
● The set time data are stored in SD210 to SD213 (Clock data) when SM213 (Clock data read request) of the CPU module
turns ON.
● Set time will generate a time error equivalent to the transfer time.
104
[Set Clock]
button.
Displays the connection target information.
Click the button so that the date and time set in the personal computer are entered.
Set a station for which time is set.
• Currently Specified Station: Executed to the station connected to the programming tool.
• All Stations: Executed to all stations in the network specified in "Specify Module No." or
"Specify Network No."
• Specified Group: Executed to the specified group No. in the network specified in "Specify
Module No." or "Specify Network No."
Description