Mitsubishi Electric MELSEC Q Series Reference Manual page 457

(e) RSTOP instruction execution timing
With Z.RSTOP, processing is executed one after another while the start contact is ON.
With ZP.RSTOP, processing is performed one time only when the start contact turns ON from OFF.
• When completed normally
Sequence scan
Start contact
Own station CPU
Completion device
(Device specified in (D1))
Completion status indication
device (Device of (D1)+1)
CC-Link IE Controller
Network module
Network module
Sequence scan
Target station CPU
*1 Several scans are taken until the sequence scan is stopped, depending on the system configuration, sequence scan time, etc.
RSTOP
0 END 0
OFF
Channel 1
*1
0 END 0 END
Remote STOP
CHAPTER 9 DEDICATED INSTRUCTIONS
END 0 END 0 END
1 scan
Stopped
9
0 END
455