Mitsubishi Electric MELSEC Q Series Reference Manual page 235

Item
Assignment Method
Transfer from/Transfer to
Transfer from
LB
Transfer to
Transfer from
LW
Transfer to
*1 LB is set in 16-point units (Start: 0
Select a link device assignment method.
• Points/Start: Enter link device points and start I/O numbers.
• Start/End: Enter the start and end numbers of the link devices.
Displays the module numbers and network types of the transfer source and
transfer target.
Set the LB ranges of the transfer source.
Points, Start, End
(Setting range: 0000
Set the start numbers of the transfer target LB.
Points, Start, End
(Setting range: 0000
Set the LW ranges of the transfer source.
Points, Start, End
(Setting range: 0000
Set the start numbers of the transfer target LW.
Points, Start, End
(Setting range: 0000
to End: F
H
CHAPTER 6 PARAMETER SETTING
Description
*1
to 7FFF , Default: None)
H H
*1
to 7FFF , Default: None)
H H
*1
to 1FFFF , Default: None)
H H
*1
to 1FFFF , Default: None)
H H
), and LW is set in 1-point units.
H
6
233