Own Station No. Is Out Of Range - Mitsubishi Electric MELSEC Q Series Reference Manual

10.4.5

Own station No. is out of range

The following explains the procedures to be taken when a station has a station No. that is larger than the total number
of stations in a network.
The total number of stations in a network is limited to four.
(1) When a programming tool connected station is normally operating
Control
station Selected Normal station
No.1 station No.2
Normal station Normal station
No.8 No.3
Control station Normal station
No.1 No.2
Normal Normal station
Selected
station No.3
station
No.8
Select the own station.
An error has occurred in the station No.8.
Select the station No.8.
Click the error details button.
The Error Factor field indicates that the station No.8 is larger than
the total station No. per network.
Take corrective actions according to the troubleshooting.
CHAPTER 10 TROUBLESHOOTING
549
10