Mitsubishi Electric MELSEC Q Series Reference Manual page 191

(b) When extending the send range of station No.1 to 1024 points without changing the
assignment shown in (a) ("LB/LW Setting(2)")
Network
range assignment
LB/LW setting
LB0 to LB1FF Station No.1
No.2
LB200 to LB3FF
LB400 to LB5FF No.3
LB600 to LB7FF No.4
LB800 to LB9FF Station No.1
LB7FFF
LW0 to LW1FF Station No.1
LW200 to LW3FF No.2
No.3
LW400 to LW5FF
LW600 to LW7FF No.4
LW800 to LW9FF Station No.1
LW1FFFF
When any of the station send ranges in LB/LW has been changed, check the link refresh range of each station. (
204, Section 6.5)
Control station Normal station
No.1 No.2
Link relay (LB)
No.1 send range Station No.1
No.2 No.2 send range
No.3 No.3
No.4 No.4
No.1 send range Station No.1
Link register (LW)
No.1 send range Station No.1
No.2 No.2 send range
No.3 No.3
No.4 No.4
No.1 send range Station No.1
CHAPTER 6 PARAMETER SETTING
Normal station Normal station
No.3 No.4
Station No.1 Station No.1
No.2 No.2
No.3 send range No.3
No.4 No.4 send range
Station No.1 Station No.1
Station No.1 Station No.1
No.2 No.2
No.3 send range No.3
No.4 No.4 send range
Station No.1 Station No.1
6
Page
189