Mitsubishi Electric MELSEC Q Series Reference Manual page 534

Item
Communication status
Error details button
● When a transient transmission error occurs, check the error description in error code and take corrective action.
When a transient transmission error log is cleared after taking a corrective action toward the error, the communication
error display is cleared.
( Page 533, Section 10.3.3)
● When multiple stations on the same system have the same network No.
If a station other than those on the system is selected while a station of the lowest start I/O No. has a baton pass error, a
transient execution error (no baton passing on the own station) (E504
Resolve the baton pass error, and then redo the operation.
(2) Error details
When clicking
Take corrective action according to troubleshooting.
532
Description
Data linking
Cable disconnection
Communication error (other than cable disconnection)
Module error (CC-Link IE Controller Network parameter setting error
or transient transmission error)
Displayed at faulty parts. (
button etc., the "Error Details" window is displayed.
Page 532, Section 10.3.2 (2))
) will occur.
H
Display content
etc.