Redundant Settings - Mitsubishi Electric MELSEC Q Series Reference Manual

6.7

Redundant Settings

For Redundant CPUs, set the operation mode of the CC-Link IE Controller Network module on system B. (
138, Section 4.7)
1.
Configure the network setting. (
2.
Open the "Redundant settings" window in the programming tool.
Project window
3.
Configure settings with reference to the description below.
4.
Click the
Item
Network type
Start I/O No.
Station No. (System A)
Mode (System A)
Station No. (System B)
Mode (System B)
Page 180, Section 6.2)
[Parameter] [Network Parameter]
button
button.
Displays the station type of the CC-Link IE Controller Network module on system B. (Same
as system A)
Displays the start I/O No. of the CC-Link IE Controller Network module on system B in units
of 16 points. (Same as system A)
Displays the station No. of the CC-Link IE Controller Network module on system A.
Displays the operation mode of the CC-Link IE Controller Network module on system A.
Displays the station No. of the CC-Link IE Controller Network module on system B.
Station No. of system B is set as system A's station No. +1.
Select an operation mode for the CC-Link IE Controller Network module on system B.
( Page 182, Section 6.2 (7))
CHAPTER 6 PARAMETER SETTING
[Ethernet/CC IE/MELSECNET]
Description
Page
6
231