Chapter 5 Preparation And Setup; Implementation And Installation; Handling Precautions - Mitsubishi Electric MELSEC Q Series Reference Manual

CHAPTER 5
This chapter explains the procedures for connecting the CC-Link IE Controller Network module to the network, wiring
and other information.
5.1

Implementation and Installation

This section provides the handling precautions, from unpacking to installation of the CC-Link IE Controller Network
module.
For details of the implementation and installation of the CC-Link IE Controller Network module, refer to the following.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
5.1.1

Handling precautions

This section describes precautions for handling the CC-Link IE Controller Network module itself.
(1) Since the module case is made of resin, do not drop the module or apply a
strong impact to it.
(2) Do not remove the printed-circuit board of the module from the case.
Doing so will cause failure.
(3) Be careful to prevent foreign matter such as dust or wire chips from entering
the module. Failure to do so may cause a fire, failure or malfunction.
(4) A protective film is attached to the module top to prevent foreign matter such
as wire chips from entering the module during wiring. Do not remove the film
during wiring.
Be sure to remove it for heat dissipation before system operation.
(5) Before handling the module, touch a grounded metal object to discharge the
static electricity from the human body.
Not doing so may cause a failure or malfunction of the module.
(6) Tighten the screws such as module fixing screws within the following ranges.
Module fixing screw (M3 screw)
Terminal screw on external power supply terminal block (M3 screw)
*1 The module can be easily fixed onto the base unit using the hook at the top of the module.
However, it is recommended to secure the module with the module fixing screw if the module is subject to significant
vibration.
PREPARATION AND SETUP
Screw location
*1

CHAPTER 5 PREPARATION AND SETUP

Tightening torque range
0.36 to 0.48N m
•
0.42 to 0.58N m
•
5
145