Cable Disconnection Or Line Being Established - Mitsubishi Electric MELSEC Q Series Reference Manual

10.4.1

Cable disconnection or line being established

The following explains the procedures to be taken when a cable is disconnected between the OUT-side of station No.3
and the IN-side of station No.4, or when the line connection is being established.
(1) When a programming tool connected station is normally operating
Control
station Normal station
Selected
No.1 No.2
station
Normal station Normal station
No.4 No.3
Control station Normal station
No.1 No.2
Normal station Normal
No.4 station
No.3
Selected
station
Select the own station.
A communication error has occurred between the OUT-side of the station
No.3 and the IN-side of the station No.4.
Select the faulty station (station No.3).
An error has occurred in the station No.3.
Click the error details button.
The Error Factor field indicates that a cable is disconnected or a line is
being established.
Take corrective actions according to the troubleshooting.
CHAPTER 10 TROUBLESHOOTING
543
10