Mitsubishi Electric MELSEC Q Series Reference Manual page 427

(5) Program example
The following is a program in which, when an interrupt program is started, data sent from station No.1 by the
SEND instruction are read out from channel 5 into D770 to D773.
• SEND instruction:
(a) System configuration example
CPU module
(b) Parameter setting (
• Interrupt setting
• Intelligent function module interrupt pointer setting
(c) Devices used in the program example
• Special relay (SM)
Device
SM400 Always ON
• Devices used by the user
Device
M165 Dummy
D370 to
Control data
D379
Page 400, Section 9.9
Station No.1
CC-Link IE Controller
Network module
Channel 1
Channel 2
SEND
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Network No.1
Page 225, Section 6.6)
Description
Description
CHAPTER 9 DEDICATED INSTRUCTIONS
Station No.2
CC-Link IE Controller CPU module
Network module
Channel 1
Channel 2 SM400
I50 RECVS
Channel 3
Channel 4
IRET
Channel 5
Channel 6
Channel 7
Channel 8
Device
Device
D770 to
Receive data storage device
D773
Description
—
Description
—
425
9