(5) Simple network parameter setting
Network parameters required for network construction can be easily set up with the programming tool.
(
Page 177, CHAPTER 6)
(6) Network diagnostics
Network status and the operating status of stations can be checked by the CC IE Control diagnostics of the
programming tool, enabling quick troubleshooting at system startup and during operation. (
Section 10.3)
Programming tool
Control station
No.1
Normal station
No.4
CHAPTER 1 OVERVIEW
Page 526,
OUT-side cable
disconnection
Normal station
No.2
Normal station
No.3
IN-side cable
disconnection
1
31