Jp/Gp.write (Data Write To Programmable Controllers On Other Stations) - Mitsubishi Electric MELSEC Q Series Reference Manual

Cc-link ie controller network
Hide thumbs Also See for MELSEC Q Series:
Table of Contents

Advertisement

9.5
JP/GP.WRITE (Data Write to Programmable Controllers
on Other Stations)
The WRITE instruction writes data to devices of a programmable controller on another station. (In units of words)
Internal device
Setting
(System, User)
data
Bit
Word
(S1)
(S2)
*1
(D1)
(D2)
*1
T, C, D, W, ST, SD or SW can be used.
For SD/SW, data can be written within the setting range allowed for the user.
For details on SD/SW, refer to the following.
Manual for the CPU module and network module on the target station
• Instruction format
[Instruction symbol]
[Execution condition]
JP.WRITE
GP.WRITE
• Instruction format (Available when the own station has a Universal model QCPU)
[Instruction
[Execution
symbol]
condition]
JP.WRITE
GP.WRITE
*2
If the device setting in the PLC parameter is different between the own and target stations, use "(D1)" (with double
quotation marks) to specify.
(1) Setting data
*1
Setting data
Jn
Un
(S1)
(S2)
(D1)
Available devices
Link direct device
File
J\
register
R, ZR
Bit
Word
[Instruction format]
Start contact
Start contact
[Instruction format]
Start contact
Start contact
Network No. of the own station (1 to 239, 254)
254: The network specified in Valid module during other station access
Start I/O number of the own station's CC-Link IE Controller Network module
(00 to FE
: The higher two digits of the 3-digit I/O number)
H
Start device of the own station that stores control data
(
Page 354, Section 9.5 (2))
The own station's start device where write data are stored.
Target station's start device to which data are to be written.
(A contiguous area for the write data length is required.)
CHAPTER 9 DEDICATED INSTRUCTIONS
Intelligent
function
Index
module device
register Zn
U\G
JP.WRITE
Jn
(S1)
Un
(S1)
GP.WRITE
Jn
(S1)
(S2) "(D1)" (D2)
JP.WRITE
Un
(S1)
(S2) "(D1)" (D2)
GP.WRITE
Description
Constant
Others
K,H
$
(S2)
(D1)
(D2)
(S2)
(D1)
(D2)
*2
*2
Data type
Binary 16 bits
Device name
351
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec qj71gp21-sxMelsec qj71gp21s-sx

Table of Contents