Mitsubishi Electric MELSEC Q Series Reference Manual page 273

Item
Constant Link Scan
Block Data Assurance per Block data assurance per station is
Station available
Punctuality is guaranteed
Transient Setting
Maximum No. of Transients in One
Station
2.
Complete settings in the programming tool based on the contents filled in the parameter sheet.
• Network range assignment (Control station (No. 1))
• Supplementary setting (Control station (No. 1))
CHAPTER 8 PROGRAMMING
Setting contents
ms (Range: 1 to 500)
Checked
Not checked
Checked
Not checked
times (Range: 1 to 10)
8
271