Jp/Gp.recv (Data Reception From Programmable Controllers On Other Stations) - Mitsubishi Electric MELSEC Q Series Reference Manual

9.10
JP/GP.RECV (Data Reception from Programmable
Controllers on Other Stations)
This instruction reads data received from a programmable controller on another station. (For main program)
Internal device
Setting
(System, User)
data
Bit Word
(S1) —
(D1) —
(D2)
[Instruction symbol] [Execution condition]
JP.RECV
GP.RECV
(1) Setting data
Setting data
Jn
Un
(S1)
(D1)
(D2)
*1 Local devices and file registers for each program cannot be used as devices in setting data.
Link direct
File
device J\
register
R, ZR
Bit
[Instruction format]
Start contact
Start contact
*1
Network No. of the own station (1 to 239, 254)
254: The network specified in Valid module during other station access
Start I/O number of the own station's CC-Link IE Controller Network module
(00 to FE : The higher two digits of the 3-digit I/O number)
H
Start device of the own station that stores control data
( Page 414, Section 9.10 (2))
Start device of the own station that stores receive data
(A contiguous area for the receive data length is required.)
The own station's device that is turned on for one scan upon completion of the
instruction
(D2)+1 also turns ON if the instruction execution has failed.
CHAPTER 9 DEDICATED INSTRUCTIONS
Available devices
Intelligent
function
module device
Word
U\G
—
—
—
JP.RECV
GP.RECV
Description
Constant
Index
register Zn
K, H $
Jn (S1) (D1) (D2)
Un (S1) (D1) (D2)
Data type
Binary 16 bits
Device name
Bit
9
Others
413