Mitsubishi Electric MELSEC Q Series Reference Manual page 626

MELSECNET/H
No. Name
SB0091 Forward loop status
Forward loop status of the
SB0092
remote master station
SB0095 Reverse loop status
Reverse loop status of the
SB0096
remote master station
SB0099 Forward loop loopback
SB009A Reverse loop loopback
624
CC-Link IE Controller Network
No. Name
SB0065 Loopback status
— —
SB0065 Loopback status
— —
SB0065 Loopback status
SB0065 Loopback status
Precautions for
Compatibility
replacement
• Although the CC-Link IE
Controller Network uses
two-core cables, loopback
is performed even if a
disconnection or error is
detected on one side.
(No. changed)
• The cause of loopback
can be checked by Own
station's loop status
(SW0064).
Delete the sequence
— program for the
corresponding part.
• Although the CC-Link IE
Controller Network uses
two-core cables, loopback
is performed even if a
disconnection or error is
detected on one side.
(No. changed)
• The cause of loopback
can be checked by Own
station's loop status
(SW0064).
Delete the sequence
— program for the
corresponding part.
• Although the CC-Link IE
Controller Network uses
two-core cables, loopback
is performed even if a
disconnection or error is
detected on one side.
• The station No. for the
(No. changed)
station where a loopback
is executed can be
checked by IN-side
loopback station No.
(SW0070).
• Although the CC-Link IE
Controller Network uses
two-core cables, loopback
is performed even if a
disconnection or error is
detected on one side.
• The station No. for the
(No. changed)
station where a loopback
is executed can be
checked by OUT-side
loopback station No.
(SW0080).