Mitsubishi Electric MELSEC Q Series Reference Manual page 601

No. Name
SW0130 Current OUT-side
to error frame reception
SW0137 status
SW0140 IN-side error frame
to reception detection
SW0147 status
Stores whether the error frame is received or not in the OUT-side transmission
path of each station.
0: A line error is not occurring on the transmission path of each station's
OUT.
1: A line error is occurring on the transmission path of each station's OUT.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
SW0130 16 15 14 13 12 11 10
SW0131 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
SW0132 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
SW0133 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
SW0134
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
SW0135
96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
SW0136 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97
SW0137 - - - - -
Each number in the table represents station No.
(Condition)
• Valid when Baton pass status (own station) (SB0047) is OFF.
When Baton pass status (own station) (SB0047) is turned ON (error), data
prior to error is held.
• Valid only for the normally operating station at Baton pass status of each
station (SW00A0 to SW00A7).
Stores whether the error frame is received or not in the IN-side transmission
path of each station from power-on to the present.
The stored value is cleared when Clear IN-side transmission error counter
(SB0007) is turned ON.
0: A line error has not yet occurred on the transmission path of each
station's IN.
1: A line error occurred on the transmission path of each station's IN.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
SW0140 16 15 14 13 12 11 10
SW0141 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
SW0142 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
SW0143 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
SW0144
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65
SW0145
96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
SW0146 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97
SW0147 - - - - -
Each number in the table represents station No.
(Condition)
• Valid when Baton pass status (own station) (SB0047) is OFF.
When Baton pass status (own station) (SB0047) is turned ON (error), data
prior to error is held.
• Valid only for the normally operating station at Baton pass status of each
station (SW00A0 to SW00A7).
Description
9 8 7 6 5 4 3
- - - 120 119 118 117 116 115 114 113
9 8 7 6 5 4 3
- - - 120 119 118 117 116 115 114 113
APPENDICES
Availability
Control Normal
station station
2 1
2 1
599
A